Frequent question: What is the difference between Type F and Type FA transmission fluid

the Type F helps give a firmer shift but doesn’t hold up well to heat. Type FA is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. It is designed for use where Ford specifications M2C33-F, M2C33-G and Ford Type F fluids are recommended.

Can you put Type F transmission fluid?

RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.

Can you mix type F with mercon?

It’s generally held that a quart or two of F and the rest of a C4 filled with Mercon works fine. Old fart type GM guys know that you can add a quart of Type F to an aging and slipping GM transmission to squeeze a few more useful miles out of it.

IT IS INTERESTING:  How do you test a starter motor with a multimeter

Is Type F transmission fluid the same as mercon?

Synthetic and conventional oils are 100 percent compatible. What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.

What happens if you put the wrong type of transmission fluid in your car?

Automatic transmissions must only use the fluid specified by the automaker, such as General Motors’ Dexron series or Toyota’s Type T. Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission.

What vehicles use Type F transmission fluid?

Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows: Automatic transmissions in certain older Toyota, Mazda, Volvo, and other imported vehicles that require an ESW-M2C33-F fluid. In addition, this type of ATF is specified for some Ford power steering systems.

Can I use dexron 3 instead of Mercon V?

Active member. Mercon v is a Ford spec’d tranny fluid, but the bottle says it can be used for dexron iii applications.

Is Mercon V type F?

Mercon — Ford fluid introduced in 1987, very similar to Dexron II. OK for all earlier Fords, except those that require Type F. Mercon V — Ford’s newest type, introduced in 1997 for Ranger, Explorer V6 and Aerostar, and 1998 & up Windstar, Taurus/Sable and Continental. Must not be used in 1997 or earlier Fords.

Can you mix dexron and mercon?

The Dexron/Mercon fluid is a general use fluid so it can be used in different makes of cars, but it is still meets Dexron specs and you can mix other Dexrons with it. … It’s all fine for your car.

IT IS INTERESTING:  What are the components of a motor

Can dexron 2 and 3 be mixed?

Yes, you can mix them together, as long as you peel one of the “I”s off of the Dextron III bottle before pouring it in…on second thought…you probably don’t even need to do that.

What is the best type F transmission fluid?

Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows: Automatic transmissions in certain older Toyota, Mazda, Volvo, and other imported vehicles that require an ESW-M2C33-F fluid. In addition, this type of ATF is specified for some Ford power steering systems.

What is Mercon LV compatible with?

Dexron® VI/Mercon® LV Automatic Transmission Fluid is a premium quality, fully synthetic, multi-vehicle, low viscosity automatic transmission fluid that is recommended for use in those General Motors and Ford vehicles that specify the use of Dexron® VI and Mercon® LV fluids respectively.

Is Mercon V full synthetic?

Valvoline™ MERCON® V Full Synthetic Automatic Transmission Fluid, 1 Quart. ValvolineMERCON® V Full Synthetic Automatic Transmission Fluid is recommended for most vehicles. ValvolineMERCON® V Full Synthetic Automatic Transmission Fluid is recommended for most vehicles.

Can the wrong transmission fluid cause slipping?

While several things might trigger slipping gears, if it happens after changing your fluid, it could be due to using the wrong transmission fluid.

Can I add new transmission fluid to old?

You can just add new fluid without draining some, unless you are replacing what has leaked out. The transmission doesn’t have a plug like the oil pan either, you have to loosen the bolts all the way around the pan and be prepared to replace the gasket when you get ready to close.

IT IS INTERESTING:  What does engine hesitation feel like

Does it matter what kind of transmission fluid you use?

The easiest way to make sure you’re using the right type of ATF is to check the owner’s manual. It’ll tell you exactly which ATF the manufacturer recommended for your car. You may also find a recommendation on the dipstick. Either is a reasonable resource for determining the right type of fluid for your transmission.

Four wheels