How do I identify a 46re transmission

AUTOMATIC TRANSMISSIONS The identification plate is attached to the right side of the transmission case. The 42RE/44RE/46RE is a 4-speed fully automatic transmission with electronic governor. The ID numbers are stamped on the case’s left side just above the oil pan. Beside above, what is a 46rh transmission?

What vehicles have 46RE transmission?

A518 (46RH/46RE)

  • Dodge Ram pickup and vans 150/250/350 V8 and diesel engines (DGT)
  • Dodge Ramcharger SUV 1988-1993 5.2L & 5.9L V8.
  • Jeep Grand Cherokee 1993 5.2L, 1998 5.9L.
  • 1996 Dodge Dakota V8 (Also 98-03 Dakota 5.9L R/T)
  • 1998-2003 Dodge Durango 5.9L V8 (4WD or 2WD)
  • 1998–2003 Dodge Dakota R/T.

Are all 46RE transmissions the same?

All 46Re’s are not the same. Basically, the short form is that ’96-99 Dakota and Durango interchange.

How do I know what transmission is in my Dodge truck?

Look inside the truck cab on the driver’s side to see if there is a clutch pedal. If there is a clutch pedal, this means that the Dodge Ram has a manual transmission. If there is no clutch pedal, then the truck has an automatic transmission.

IT IS INTERESTING:  You asked: How does a spindle motor work

How many gears does a 46RE have?

Control of the 46RE

They use a sun gear and two planetary gear sets. They had three forward gears and reverse, with the driver controlling the gear by pressing buttons built into the dashboard rather than the more customary gear shift lever. You could find these gear buttons at the far left of the dash.

What’s the difference between 46RE and 47re?

Case is a liitle different, 47 uses a larger torque converter, 46 OD clutch as 4 discs 47 has 5, 46 direct clutch uses 8 discs, 47 has 10 disc, 46 has 3 discs in the front clutch, the 47 uses 4. There are other differences too, but they are teh big ones.

What is the difference between a 46RH and a 46RE?

The 46RH is longer overall and non computer controlled for shifting. The 46RE is the short one and is computer controlled shift points.

Where is the transmission model number located?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

Can I tell what transmission I have by the Vin?

Decode The VIN Number

You can find the VIN on either the driver’s side door or the dashboard. It will be on a white sticker with black lettering that also includes other information about your vehicle. … They would put the VIN into their computer and tell you what transmission type you have precisely.

IT IS INTERESTING:  What is the best Jaguar engine

Are 5.2 and 5.9 transmission the same?

There not interchangeable. Other then that,it’s the same. Ask for the build sheet for the 5.2 and the 5.9 then you’ll know the difference.

What is the difference between a 47RE and a 48RE transmission?

47RE: An electronically controlled four-speed automatic transmission found in ’96 to ’02 Dodge trucks, as well as some ’03 models. 48RE: An electronically controlled four-speed automatic transmission found in ’03 to’07 Dodges. … The intermediate shaft typically supports all the planetary gears in a transmission.

Do transmissions have serial numbers?

There will be a small metal tag on one of the bolts holding the tranny case together, OR, more commonly, there will be numbers and letters cast into thetrans case itself, like TH400, or 4L60E for example. 2 people found this helpful. and some just have metric on the pan.

How do I identify a 47RE transmission?

If the 8th digit of the vehicle identification number (VIN) is a “6”, the engine is a standard output model and the transmission is a 47RE. If the 8th digit of the VIN is a “C”, the engine is a high output model and the transmission is the stronger 48RE.

What years did dodge use the 46RE transmission?

The 46RE transmissions were first used on 1996 models and these units had computer-controlled shifting, whereas the first generation 46RH transmissions were hydraulically activated similar to the A-727. First gear on the A-518 is 2:45 to 1, with reverse gear rated at 2:21 to 1.

What is the difference between a 727 and 904 transmission?

Generally, a 727 shifter lever is straight and a 904 is offset (though some applications have different length of levers to compensate for vehicle model/engine combinations). Remember, only smallblocks have 904 derivative transmissions, though some came with 727’s (i.e. certain truck and HP car models).

IT IS INTERESTING:  How many moving parts does a Tesla engine have

How much does a 46RE transmission weigh?

Technical Details

Manufacturer Shift Rite
Brand Shift Rite
Item Weight 300 pounds
Package Dimensions 36 x 36 x 12 inches
Item model number 46RE 2WD 98-99
Four wheels