How long is a 727 transmission

Style A B
Small Block 34 3/8 in. 16 in.
Big Block 34 1/2 in.

Are 727 transmissions any good?

When speaking of automatic transmissions, the Chrysler A-727 or TorqueFlite 8 units are not only easy to find because of their many years of use, but they are also very strong and can be used in many performance and non-Chrysler applications, as well.

Will a 727 transmission fit a 360?

You need a flexplate or converter for a 360 to make it work.

How much HP can a stock 727 handle?

The 727 is a relatively simple piece when compared to other automatic transmissions, and its strength is a function of that simplicity. We’ve put stock TorqueFlite transmissions behind big-blocks pushing upwards of 600 hp and found they not only survive, but perform quite well.

How do you tell the difference between a 727 and 904 transmission?

Look at the shape of the pan. A 904 pan is shaped like a rectangle with the corner cut off. A 727 is sort of the same shape, but has a dogleg added near the front passenger side of the pan, near the dipstick tube.

IT IS INTERESTING:  You asked: Which branch is dangerous in engineering

How much does it cost to rebuild a 727 transmission?

The prices i see for a 727 rebuild in my area are $700-$1000 including labor to remove and install. That being said, once the trans is on my workbench and unless there is something really wrong, I can rebuild a 727 or 904 myself in under half an hour and typically for less than $100 in parts.

What kind of fluid goes in a 727 transmission?

Now Mopar recommends only ATF+4 for any torqueflite.

Will a 5.7 Hemi bolt up to a 727 transmission?

Yes a smallblock torqueflite will bolt right up to the 3rd gen. Hemis. Mopar Performance sells a flexplate for this application or if you already have a truck flexplate you can use it by removing the starter ring gear slightly modifying the torque converter bolt holes.

Will a 727 transmission fit a 318?

a small block 727 will fit a small block 318….

Will a 360 transmission fit a 318 motor?

It will fit no problem. The 318 is an internally balanced engine verses the 360 being an external balanced engine. Both engines will have a 727 Torque Flight transmission.

How much does a 727 transmission weight?

Gearing for the 727 is 2.54:1 for 1st gear, 1.54:1 for second, 1:1 for third and 2.21:1 for reverse. The weight of the transmission is a hefty 161 lbs.

What is a TorqueFlite transmission?

The three-speed TorqueFlite automatic transmission was Chrysler’s mainstay from the 1950s to the 1990s; its basic design remains essential to current truck transmissions. … The first variant of the A-488 was the A-904 (“TorqueFlite 6”), used with the slant six engine in some of the 1960 cars.

IT IS INTERESTING:  Where is slip ring induction motor used

How much does a 440 weigh?

Engine Weight
Mopar 360 “LA” 550
Mopar 350-361-383-400 “B” V8 620
Mopar 413-426W-440 “RB” V8 670
Mopar Street Hemi 765

How do I identify my Chrysler transmission?

Look at the transmission from the driver’s side of the vehicle by going under the vehicle at the driver’s-side door. If the transmission is off the vehicle, it is on the left side, when looking from behind the unit and the input shaft is pointing forward.

Four wheels