How much does a 46re transmission weigh

Manufacturer Shift Rite
Brand Shift Rite
Item Weight 300 pounds
Package Dimensions 36 x 36 x 12 inches
Item model number 46RE 2WD 98-99

How much does a Dodge Transmission weigh?

A truck 545RFE transmission, with converter, and fluid, weighs about 238 lbs. That’s for the 2WD version.

How much does a 47RE transmission weight?

47RH & 47RE Transmission Specs

Transmission: Chrysler 47RH & 47RE
Case Material: Aluminum
Max Input Torque: ~ 450 lb-ft
Max GCWR: 19,000 lbs
Weight: ~ 200 lbs dry, w/out torque converter

Are all 46RE transmissions the same?

All 46Re’s are not the same. Basically, the short form is that ’96-99 Dakota and Durango interchange.

What vehicles have 46RE transmission?

A518 (46RH/46RE)

  • Dodge Ram pickup and vans 150/250/350 V8 and diesel engines (DGT)
  • Dodge Ramcharger SUV 1988-1993 5.2L & 5.9L V8.
  • Jeep Grand Cherokee 1993 5.2L, 1998 5.9L.
  • 1996 Dodge Dakota V8 (Also 98-03 Dakota 5.9L R/T)
  • 1998-2003 Dodge Durango 5.9L V8 (4WD or 2WD)
  • 1998–2003 Dodge Dakota R/T.
IT IS INTERESTING:  How do you test a cold engine

How much does a 13 speed transmission weigh?

RT-13

Product Snapshot
Speeds: 13 forward, 3 reverse
Torque Capacity Lbs.Ft. (Nm): 1250-2050 (1695-2779)
Weight Lbs. (kg): 714 (324)
Length Inches (mm): 33.1 (841)

How much does it cost for a new transmission?

On average, replacing a vehicle transmission costs around $2,600, with average prices the replacement of a transmission ranging from about $1,800 to $3,400 in the US for 2020 according to TransmissionRepairCostGuide.

How much HP can a stock 47RE handle?

A stock 47RE will only safely handle 100psi of fluid pressure, while a Racing Valve body from Power Driven Diesel can handle 225 to 250psi, and thus more than 1,200 horsepower output.

How much does it cost to rebuild a 47RE transmission?

Standard shop rebuild is $3000. Cheap rebuild with just kit, clutches and seals can be had for $1000 from retired shadetree builders.

How many gears does a 47RE transmission have?

The 47RE carries a 450 pound-feet internal torque rating, which approximates to 610 newton-meters. It has three normal gears, one overdrive gear, and reverse. The original design for the 47RE has changed little over the years, albeit with some bells and whistles added.

How do I know if I have a 46RE transmission?

AUTOMATIC TRANSMISSIONS The identification plate is attached to the right side of the transmission case. The 42RE/44RE/46RE is a 4-speed fully automatic transmission with electronic governor. The ID numbers are stamped on the case’s left side just above the oil pan.

What is the difference between a 46RH and a 46RE?

The 46RH is longer overall and non computer controlled for shifting. The 46RE is the short one and is computer controlled shift points.

IT IS INTERESTING:  What happens if you put transmission fluid instead of oil

Where is the transmission model number located?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

What’s the difference between 46RE and 47re?

Case is a liitle different, 47 uses a larger torque converter, 46 OD clutch as 4 discs 47 has 5, 46 direct clutch uses 8 discs, 47 has 10 disc, 46 has 3 discs in the front clutch, the 47 uses 4. There are other differences too, but they are teh big ones.

How much horsepower can a 904 transmission handle?

A friend of mine has a 904 behind a 625 HP 340 in his race car, seems to do fine. It is however built beyond stock specs. For the 360 it should be fine, unless you plan on racing it, using a trans brake etc, I would run with it.

Are 5.2 and 5.9 transmission the same?

There not interchangeable. Other then that,it’s the same. Ask for the build sheet for the 5.2 and the 5.9 then you’ll know the difference.

Four wheels