What transmissions will fit a 7 3 Powerstroke

Transmission Type Model Years
4R100 4 spd auto 1999 – 2003 7.3L Power Stroke
5R110W (TorqShift) 5 spd auto 2003 – 2010 6.0L & 6.4L Power Stroke
6R140 (TorqShift) 6 spd auto 2011 – current 6.7L Power Stroke
ZF S6-650 6 spd manual 1999 – 2003 7.3L Power Stroke

Will a 7.3 Idi transmission fit a 7.3 Powerstroke?

Any IDI transmission will bolt up to a 1st Gen Powerstroke, and vice versa.

Can I replace a E4OD with a 4R100?

Interchanging the E4OD/4R100 pump is pretty up front, but there are some differences you must be familiar with. All E4OD pumps are completely interchangeable. In 1998, Ford intro- duced the 4R100; one of the four pumps made for this unit is inter- changeable with the E4OD pump — as a complete assembly.

Can I put a Allison Transmission in Ford?

GM transmission in a Ford? Yes, CA Conversions makes it possible. An Allison, regardless of whether or not it is modified, brings strength to an area where ’95-to-’09 Ford pickups (and aforementioned Dodge rigs with 12- and 24-valve Cummins engines) suffer.

IT IS INTERESTING:  Frequent question: Why do motors need rewinding

What transmission is behind the 6.7 Powerstroke?

The 6R140 is standard behind Ford’s 6.7L Power Stroke turbodiesel and the only available transmission – a manual transmission option has never been offered with this engine. The transmission features a patented dual media transmission filter that allows for relatively long service intervals.

Is E4OD same as 4R100?

The Ford E4OD and 4R100 four-speed automatic transmissions were essentially the same transmission with different names. … The E4OD replaced the venerable Ford C-6 automatic transmissions. Both the E4OD and 4R100 were electronically controlled, replacing the C6’s hydraulic-controlled transmission technology.

What vehicles have the E4OD transmission?

The E4OD was introduced in 1989 and used in both light and heavy duty applications.


  • 1990–1996 Ford Bronco.
  • 1989–1998 Ford E-Series.
  • 1997–1998 Ford Expedition.
  • 1989–1998 Ford F-Series.
  • 1993–1995 SVT Lightning.

Are all E4OD transmissions the same?

not all E40D’s are the same. some are early and late model. some use different electrical connections. some have bell housing patterns to mate up to small block,big block gas engines and some like yours are built to mate up to navistar international’s diesel 7.3l which also come early/late model.

How much does it cost to rebuild a E4OD transmission?

You can figure $2,000 to $2,500. You may be able to save money by pulling it and installing it yourself. If you decide to do so, check with the rebuilder to see if there is any warranty which could be adversly affected by a home installation. Cost of E4OD Rebuild?

How do I know what E4OD transmission I have?

To determine which is used in your vehicle, follow these guidelines: If the shifter has a P-R-N-OD-D-1 pattern, the transmission must be an AOD (applicable to 1980-1993 vehicles). If a 1989-1993 truck has an Overdrive Cancel Switch and a P-R-N-OD-2-1 shifter pattern, then it is equipped with an E4OD transmission.

IT IS INTERESTING:  How do I know if my small engine is flooded

Does Ford own Cummins?

Ford does not own Cummins, neither does Fiat/Chrysler/Dodge. Cummins Turbo Technologies is an independent company.

Can I put a Allison Transmission on a Cummins?

The Allison 1000 is the best option, and it’s now possible to reliably and affordably put it behind the Cummins engine! … For the 6.7L Cummins you can use the factory shifter, and for older trucks you can purchase a new shifter, which can be installed in a matter of minutes and still has all factory functionality.

Does Ford use Cummins?

Ford will no longer offer customers the option of having a 6.7-liter turbo diesel built by Cummins installed in the vehicles. That powerplant provided the muscle for all the diesel versions of the trucks in recent years but is being discontinued as Ford brings the truck’s key content in-house.

What transmission is in a 97 f250 Powerstroke?

Ford Automatic & Manual Transmission Ratios, Model Years

Transmission Type Model Years
ZF S5-47 (close ratio) 5 spd manual 1995 – 1997 7.3L Power Stroke
ZF S5-47 (wide ratio) 5 spd manual 1995 – 1997 7.3L Power Stroke
4R100 4 spd auto 1999 – 2003 7.3L Power Stroke
5R110W (TorqShift) 5 spd auto 2003 – 2010 6.0L & 6.4L Power Stroke

How much horsepower can a stock 4R100 handle?

Maybe about 500 or so. A hot chip on a stock transmission can blow up a 4r100, these things are designed for the gas v8 and v10 engines, not the diesels.

How much power can a stock 7.3 handle?

Built by BDP. You will be perfectly fine with stage two’s which are around 140+HP. Your stock turbo will only be in the 35-38 psi range with those sticks.

IT IS INTERESTING:  Can electrical engineers be software engineers
Four wheels